英国GRIMM格林进口微型隔膜泵 UK GRIMM imp0rted micro diaphragm pump

英国格林GRIMM进口微型隔膜泵概述：

          进口微型隔膜泵是用微型直流电动机(电压为12V、24V的电动机)做动力驱动装置，驱动内部机械偏心装置做偏心运动，由偏心运动带动内部的隔膜做往复运动。从而对固定容积的泵腔内的空气进行压缩(压缩时抽气口关闭，排气口打开形成微正压)、拉伸(压缩时排气口关闭，抽气口打开形成负压)，在泵抽气口处与外界大气压产生压力差，在压力差的作用下，将气体压(吸)入泵腔，再从排气口排出。

         进口微型隔膜泵指的就是微型真空泵，指具备一进一出的抽气嘴、排气嘴各一个，内部通过机械装置使泵内部的隔膜做往复式运动，并且在进口处能够持续形成真空或负压，排气嘴处形成微正压；工作介质主要为气体，体积小巧的一种仪器。

英国格林GRIMM进口微型隔膜泵特点:

1、移动和安装方便。

2、具有自吸功能。

3、内装压力自动开控制泵。

4、介质温度可高达60℃。

5、噪音低、耐腐蚀、压力高。

英国格林GRIMM进口微型隔膜泵工作原理：

第一种工作模式：

          电机的圆周运动，通过机械装置使泵内部的隔膜做往复式运动，从而压缩、拉伸泵腔内的空气形成负压，在抽气口处与外界大气压产生压力差，在压力差的作用下，将气体吸入泵腔，再从排气口排出。

第二种工作模式：

          进口微型隔膜泵是利用螺杆的回转来吸排液体的。进口微型隔膜泵中间螺杆为主动螺杆，由原动机带动回转，两边的螺杆为从动螺杆，随主动螺杆作反向旋转。主、从动螺杆的螺纹均为双头螺纹。由于各螺杆的相互啮合以及螺杆与衬筒内壁的紧密配合，在进口微型隔膜泵的吸入口和排出口之间，就会被分隔成一个或多个密封空间。随着螺杆的转动和啮合，这些密封空间在泵的吸入端不断形成，将吸入室中的液体封入其中，并自吸入室沿螺杆轴向连续地推移至排出端，将封闭在各空间中的液体不断排出，犹如一螺母在螺纹回转时被不断向前推进的情形那样，这就是进口微型隔膜泵的基本工作原理。

英国格林GRIMM进口微型隔膜泵技术参数：

最大流量：1-12L/min

吸       程：5m

口       径：3/8″

转       速：375-1300r/min

输入功率：10-40w

最高压力：0.24-0.9Mpa

最大电流：1-7A

电       压：12/24VDC

调压开关：0.24-0.86MPa

泵体材质：FRPP

膜片材质：三元乙丙塑胶、丁晴橡胶(耐油)

英国格林GRIMM进口微型隔膜泵用途：

          反渗透水质净化系统、过滤机、喷雾装置、工业设备、化工计量加液、卫生、环保。

UK GRIMM imp0rted micro diaphragm pump summary:

          imp0rted miniature diaphragm pump with DC micro motor (motor voltage 12V, 24V) as the power driving device, driving device of internal mechanical eccentric eccentric motion, the eccentric motion driven by internal diaphragm reciprocating motion. Thus the pump cavity of fixed volume of air compressed (compressed air exhaust port to open closed, the formation of micro positive pressure, tensile (compression) when the exhaust port closed, open air pump, negative pressure) in the inlet and outside atmospheric pressure difference generated under the action of the pressure difference of gas pressure (suction) into the pump chamber and then discharged from the exhaust port.

         imp0rted micro diaphragm pump refers to the micro vacuum pump, which has one out of the suction nozzle and an exhaust nozzle of a mechanical device, through to diaphragm inside the pump to do reciprocating motion, and can continue to form a vacuum or negative pressure in the inlet, the formation of micro positive pressure exhaust nozzle; the working medium is mainly gas, an instrument of small volume.

UK GRIMM imp0rted micro diaphragm pump characteristic:

1.Easy to move and install.

2.With self suction function.

3.Built-in pressure automatic opening control pump.

4.Medium temperature can be as high as 60 degrees.

5.Low noise, corrosion resistance, high pressure.

UK GRIMM imp0rted micro diaphragm pump working principle:

The first working model:

         The circular motion of the motor, the mechanical device makes the diaphragm inside the pump to do reciprocating motion, thereby compressing and stretching the pump chamber in the air to form the negative pressure, exhaust mouth and outside atmospheric pressure difference generated under the action of the pressure difference of gas suction pump cavity, then discharged from the exhaust port.

Second modes of work:

         imp0rted micro diaphragm pump is to use the rotation of the screw to suck and drain liquid. imp0rts of micro diaphragm pump, the middle screw for the active screw, driven by the prime mover rotation, the two sides of the screw driven screw, with the active screw in reverse rotation. The threads of the main and driven screws are double headed threads. Because of the mutual engagement of the screws and the close cooperation between the screw and the lining of the lining barrel, the inlet and the outlet of the micro diaphragm pump are separated into one or more sealing spaces. With the screw rotation and meshing, the sealed space in the pump suction side evolving, the suction chamber of liquid filled therein, and a suction chamber along the screw axis continuous passage to the discharge end, will be closed in the space of continuous discharge of liquid, like a nut in screw rotation is constantly advancing so, this is the basic principle of imp0rted micro diaphragm pump.

UK GRIMM imp0rted micro diaphragm pump technical parameter:

Maximum flow: 1-12L/min

Range of suction: 5m

Caliber: 3/8 "

Speed: 375-1300r/min

Input power: 10-40W

Maximum pressure: 0.24-0.9Mpa

Maximum current: 1-7A

Voltage: 12/24VDC

Voltage regulator: 0.24-0.86MPa

Pump body material: FRPP

Diaphragm material: three yuan ethylene propylene rubber, NBR rubber (oil resistant)

UK GRIMM imp0rted micro diaphragm pump purpose:

         Reverse osmosis water purification system, filter, spray equipment, industrial equipment, chemical metering, liquid, sanitation, environmental protection.

进口微型隔膜泵官网：http://www.021fmc.cn/aspcms/product/2017-7-28/2785.html 

GRIMM中国：

      上海秉奇阀门有限公司为GRIMM公司在中国的总代理，是中国拥有GRIMM代理权及销售权，主要为中国地区客户提供服务与技术支持，同时，秉奇人员也积极参与总部技术培训学习，并不断掌握产品原理、实际运作、工程技术做为基石，完善对中国地区客户需求。             

关于GRIMM：

             英国格林（GRIMM）国际有限公司是亚太地区流体控制领域的主要生产和供应商之一，公司总部位于克莱福德，拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在水泵领域内处于领先地位。在许多个国家均有生产水泵基地，中国由上海秉奇阀门负责中国市场各项业务与技术支持中心，同时向中国市场销售。

         英国格林（GRIMM）产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域，以及人们日常生活中。

         英国格林（GRIMM）主要产品有：管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系：

GRIMM品质：

    GRIMM公司注重产品质量及使用寿命，全部采用先进制造技术和生产设备，并坚持不懈研发新产品，为确保不间断的全过程质量控制，在生产过程中采用(SPC)过程控制和(TQM)全面质量管理；GRIMM的严格规范实现了不让品质拖节，有效保障产品每个细节达到的性能指标。

GRIMM专业：

    掌握核心的流体控制技术，提供市场领先的产品、服务和解决方案，帮助用户提高效率，带来至关重要的基础设施。

GRIMM服务：

    我们与用户紧密合作，支持一系列系统使用技术和文件报告，提供售前、售中、售后服务和技术支持，有了您的信任与支持，我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

ab0ut GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, me-tallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

英国格林总代理商：上海秉奇阀门有限公司，微信咨询：

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

Welcome new and old customers call negotiate!

Contacts：Huang Tianxiang

QQ：673088832

Mobile Phone:13524269805 (微信同号）

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District